【摘 要】
：
This study is focused on the influence of hydro-erosive grinding factor on nozzle internal structure characteristics. Employing the method of X-ray CT scan in Shanghai Synchrotron Radiation Facility (
【机 构】
：
School of Automotive Studies, Tongji University, China
【出 处】
：
13th International Conference on Liquid Atomization and Spra
论文部分内容阅读
This study is focused on the influence of hydro-erosive grinding factor on nozzle internal structure characteristics. Employing the method of X-ray CT scan in Shanghai Synchrotron Radiation Facility (SSRF), the threedimensional digital model of nozzle is acquired, by which the nozzle dimensions are measured and analyzed. 5 single-hole diesel nozzles with different hydro-erosive grinding time were scanned. By using MATLAB to code the image-processing program, the automatic measurement of the characteristic parameters of each nozzles internal structure is realized. The measuring results show that, hydro-erosive grinding has a greater effect on the orifice inlet than on the orifice outlet. It enlarges the orifice inlet diameter and thus, enlarges the orifice conicity. Hydro-erosive grinding also improves the orifice surface roughness and slightly influence on the orifice length. Conspicuous effects are found on the orifice rounding radius. Hydro-erosive grinding, on one hand, enlarges the inlet rounding radius value, and on the other hand, improves the uniformity of the rounding radius along azimuthal direction.
其他文献
A novel airblast injector is designed for gas turbine combustors.Unlike standard pressure swirl and prefilming/non-prefilming air blast atomizers,the novel injector is designed to improve the fuel inj
Fabrication of long-lived superhydrophobic surfaces(SHS)received considerable academic interest in recent years due to their use in practical applications involving self-cleaning,anti-icing,reduced ad
Understanding the detailed spray characteristics of a fuel spray undergoing vaporization is a key for better liquid fuel combustion efficiency.The physical processes involved in spray atomization unde
Miniature spray nozzles are interesting to several applications from micro-thrusters to lithographic patterning.We investigate geometric scaling effects of pressure swirl atomizers,both theoretically
The impact of water droplets onto an inclined surface which is cooled down well below the freezing point of water is investigated experimentally. Droplets are generated using a hypodermic needle which
The impact of a solid sphere on a free surface of water and its penetration below the surface is a topic of interest among engineers and scientists owing to its wide range of applications in various f
An experimental investigation of the impact of Newtonian and viscoplastic drops onto viscoplastic surfaces characterized by different magnitudes of the yield stress is presented. Whilst no systematic
An experimental study is presented to clarify impact behaviors of high-speed fine droplet onto horizontal dry surfaces by using our original system,which can provide high-speed fine droplet with avera
Diesel from Direct Coal Liquefaction (DDCL) and biodiesel both have their own advantages and disadvantages for combustion used in diesel engines. The fuel injection and spray measuring systems have be
Light naphtha, or low octane gasoline, is a highly volatile intermediate hydrocarbon produced during the refining process. Due to its low energy requirements for production, use of light naphtha in co