【摘 要】
：
The preparation of anti-wear and anti-corrosion coatings application to sea water cooling system in NPP is the goal of this research.In this research,iron base alloy amorphous powder was sprayed by Ac
【机 构】
：
China Nuclear Power Engineering Co.,Ltd Universit
【出 处】
：
第三届核电厂材料与安全可靠性国际研讨会 (3rd MRNPP Symposium)
论文部分内容阅读
The preparation of anti-wear and anti-corrosion coatings application to sea water cooling system in NPP is the goal of this research.In this research,iron base alloy amorphous powder was sprayed by Activated Combustion High Velocity Air Fuel Spraying(AC-HVAF),then amorphous coatings were successfully synthesized.Then make the amorphous coatings nano-crystallization through thermal crystallization method.Furthermore analysis the amorphous coatings through FESEM,SRV friction experiment equipment,Electrochemical work station,anti-wear and anti-corrosion character were systemically analyzed.It is found that the amorphous coatings sprayed by AC-HVAF display homogenous microstructure and had typical layer structure which has excellent anti-corrosion performance.After nano-crystallization,the anti-wear performance is better.Application of amorphous and nano-crystal coatings to sea water cooling system in NPP is effective.
其他文献
Alloy 690 is widely used as steam generator heat transfer tube in PWR nuclear power plants.During the process of heat exchange,the thin tubes are subjected to vibration,i.e.,flow induced vibration.Man
304 stainless steel,316L stainless steel and 316NG stainless steel are conventional materials of primary pipe in nuclear power plants.The present work is to summarize the acoustic emission(AE)characte
The electrochemical measurement is a promising method available to perform actual continuous in-situ monitoring of corrosion degradation in nuclear power plants.The tungsten/tungsten oxide electrode w
Electrochemical measurement electrode device for large scale facility service is developed.With start-up and shutdown process during verification test,304SS electrochemical corrosion potential(ECP)res
The micro-hardness of welded joint was measured,and the microstructure and fracture morphology of welded joints had been observed by using metallographic and scanning electron microscope(SEM).The resu
Nuclear Power Plant ventilation system is the important system to NPP,among which safety related ventilation systems normal operation plays a key role in safety and reliable operation of NPP.Fans as p
This work has been conducted to assess the performance of 304,316 stainless steel and the effect of various working conditions under high velocity jet impinging in various types of media containing pa
Fatigue crack growth(FCG)rate tests were conducted for main pump casing material at room temperature to investigate the effect of long-term aging at 400 ℃.It was found that the FCG rate increases with
Cast austenite stainless steels(CASS)were widely used in the primary circuit piping of pressurized water nuclear reactors(PWRs).Low cycle fatigue tests of CASS Z3CN20-09M were performed in room temper
The mechanical state at the tip of stress corrosion cracking(SCC)is one of the key factors affecting SCC behavior.Although standard specimens are generally adopted to maintain certain mechanical state