Synthesis and spectroscopic investigations of trivalent europium-doped Z2Si3O8(Z = Mg,Ca and Sr)nano

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:wushong
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
To explore the silicate lattice-based nanophos-phors,a series of Eu3+-doped Z2Si3O8(Z = Mg,Ca and Sr)materials were prepared by sol-gel procedure.The metal nitrates and silica powder were used as precursor components for the synthesis of these luminescent mate-rials.Photoluminescence(PL)emission spectra,powder X-ray diffraction(PXRD),energy-dispersive X-ray spec-troscopy(EDS),Fourier transform infrared spectroscopy(FTIR)and transmission electron microscopy(TEM)spectroscopic techniques were applied for the characteri-zation of the fabricated materials.Three peaks were observed at 589,613 and 650-652 nm corresponding to 5D0 → 7F1-3 transition in PL emission spectra.Upon 395 nm excitation and at 0.03 mol Eu3+,these nanophos-phors displayed optimum photoluminescence with the most intense peak analogous to 5D0 → 7F2 transition of dopant ion.The as-prepared phosphor materials were re-heated at 1050 and 1150℃to observe the consequences of higher temperatures on the emission intensity and crystal lattice.XRD analysis confirmed that all the synthesized materials were of crystalline nature,and the crystallinity was observed to be improved by increasing the temperature.In the FTIR spectrum,peaks at 483 and 610 cm-1 proved the existence of SiO4 group in Ca2Si3O8,and the peak centered at 417 cm-1 confirmed the presence of MgO6 octahedral in Mg2Si3O8 materials.TEM images were used to determine the particle size(13-35 nm)and to study the three-dimensional structure of nanophosphor materials. The experimental studies indicate that these materials may be promising as red-emitting nanophosphors for white light-emitting diodes.
其他文献
近年来,将稀土元素引入硅橡胶材料中的研究不断增加,稀土助剂的添加使硅橡胶的综合性能获得较大地提升.介绍了稀土在硅橡胶中的各种应用,包括改善其机械性、阻燃性、耐热性,以及赋予稀土硅橡胶复合材料荧光性、耐辐照性、抗菌性;并展望了稀土在硅橡胶材料中的应用前景.
以墨江雅邑大寨滑坡防治为目的,对滑坡的失稳机理、发展趋势及治理措施进行研究.首先,对滑坡的地质环境条件、滑坡特征等进行分析.其次,从滑坡变形迹象着手、根据勘查成果分析滑坡的失稳机理,对滑坡的发展趋势进行研判.再次,对滑坡进行稳定性计算,计算推力大小并选取以抗滑桩为主的综合治理措施,进行抗滑设计.
以重庆武隆区的一处滑坡为研究对象,结合该滑坡的分布特征及水文地质条件,利用传递系数法对其进行稳定性计算,评价分析不同水位时,各种工况下的滑坡体稳定性,根据计算结果并结合滑坡的具体特征,提出合理的防治措施建议.
硅噻菌胺是一种三甲基硅基取代的噻吩甲酰胺类活性化合物,为高效的小麦全蚀病杀菌剂药物.依据起始原料的不同,重点介绍了以2-丁酮和氰基乙酸乙酯、3-氯-2-丁酮和丙炔酸甲酯、3-巯基-2-丁酮和3-甲氧基丙烯酸甲酯、三甲基硅基乙炔、N-烯丙基-3-(三甲基硅基)丙炔酰胺为原料的五种合成路线,对比分析了每种合成工艺的优劣势及硅噻菌胺制备过程中的杂质以及减少杂质的应对方法.
A solid-phase extraction resin SIRs-P227/XAD-7HP was prepared by impregnating extractant P227 onto macroporous resin XAD-7HP beads.SIRs-P227/XAD-7HP beads were characterized by Fourier transform infrared spectroscopy(FTIR)and scanning electron microscopy(
以乙烯基硅油等为基料,添加低密度导热陶瓷粉体制得导热垫片.探讨了不同类型的导热陶瓷粉体的复配方式及用量、乙烯基硅油的黏度、表面处理剂的用量及导热粉体的加料顺序对导热垫片性能的影响.结果表明,采用氮化硼/球型硅微粉复配制得的导热垫片的综合性能优于氮化硼/氢氧化铝复配制得的导热垫片;采用黏度为500 mPa·s的乙烯基硅油即可满足客户对导热垫片力学性能的要求;当表面处理剂添加量为0.8 g时,可以保证粉体在垫片内均匀分散;制备胶料时,需要先添加球型硅微粉,依靠硅微粉增加体系黏度,搅拌一定时间后再添加氮化硼,此
根据克拉玛依市2018年各水资源利用指标进行水资源承载力评价,评价结果为严重超载,超载成因主要为克白地区地下水超采严重,农业用水和生活用水量超指标.结合现状水资源利用结构提出一系列调控措施以缓解水资源承载力超载现状.
In this communication,the electrical conduc-tivities and thermal expansion studies of microwave sin-tered co-doped ceria Ce0.8Y0.2-xDyxO2-δ(x=0,0.05,0.10,0.15 and 0.20)solid electrolyte materials for inter-mediate temperature solid oxide fuel cells(IT-SOF
通过对黏土料进行不同击实功能及不同单位面积冲量标准击实试验得到最大干密度、最优含水率,并分析他们之间的关系,验证现场黏土料填筑含水率与最优含水率之间的关系是否满足设计技术指标要求,以便更好地指导现场黏土填筑施工,确保施工质量满足相关技术规范的要求,为现场质量管控提供依据.
绩溪抽水蓄能电站钢岔管HD值4048m·m,其规模居国内前列.为检验钢岔管制作及焊接施工质量,验证结构的可靠性,部分消除钢岔管的尖端应力并使尖状缺陷钝化,保证钢岔管安全运行,进行了原型水压试验.试验结果表明,原型观测结果与有限元数值模拟计算成果基本吻合.