论文部分内容阅读
1.分解空气滤清器,清除折射器(或称导流板、斜形罩)和中央管中的灰尘。 2.将金属滤网放在干净的柴油或煤油中洗净(最好用汽油清洗,因为汽油挥发快,易干燥),将洗净的滤网吹干或放置在避风沙的地方晾干,然后在金属滤网上涂以润滑油(按季节选用不同型号的润滑油)。 3.清洗油盘,清洗后按油面要求加入润滑油(亦可用具有一定粘度的废机油)。油面过高过低都不好,油面过低,会降低滤清效果;油面过高,机油会被吸入气缸导致发动机“飞车”。
1. Disassemble the air cleaner and remove dust from the refractor (or deflector, bezel) and the central tube. 2. The metal mesh on a clean diesel or kerosene wash (preferably with gasoline cleaning, because gasoline volatile fast, easy to dry), the filter will be washed or dry place in the shelter to dry, Then coated with a metal lubricant on the oil screen (use different types of lubricants by season). 3. Clean the oil pan, after cleaning the oil surface by adding oil (also available with a certain viscosity of waste oil). Oil level is too low is not good, the oil is too low, will reduce the filtering effect; oil is too high, the oil will be sucked into the cylinder lead to the engine.