输出功率5.2W的全固态连续单横模671nm红光激光器

来源 :量子光学学报 | 被引量 : 0次 | 上传用户:alicial
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
设计了全固态连续单横模671nm红光激光器。利用880nm LD双端端面泵浦Nd:YVO4复合晶体,实现了均匀泵浦并改善了激光晶体热效应;考虑到影响倍频转化效率的各种因素,优化设计了Z字形四镜激光谐振腔,采用Ⅰ类临界相位匹配晶体LBO作为腔内倍频晶体;当泵浦功率为42.5 W时,获得了5.2 W的连续单横模671nm红光输出,光-光转化效率达到12.2%,激光器长期功率稳定性优于±2.5%(1h)。 All solid-state continuous single transverse mode 671nm red laser was designed. The 880nm LD double-ended end-pumped Nd: YVO4 composite crystal was used to achieve uniform pumping and improve the thermal effect of the laser crystal. Taking into account the various factors that affect the conversion efficiency, a zigzag four-mirror laser resonator was optimized. Ⅰ type phase-locked crystal LBO was used as the intracavity frequency doubling crystal. When the pumping power was 42.5 W, a CW output of 5.2 W at 671 nm was obtained. The light-to-light conversion efficiency reached 12.2%. The long-term laser power stability Sex better than ± 2.5% (1h).
其他文献
针对ISO/IEC 18000-6C协议的应用要求,设计了一款应用于手持超高频无线射频识别(UHF RFID)读写器输出端的两级SiGe功率放大器。在设计中采用了一种新型的晶体管面积推算方法,