论文部分内容阅读
一、加工动轴箱的三刃刀动轴箱铜瓦挂五金压入后的机械加工,一般在立式车床上进行,根据要求每加工一个轴箱须停车更换三次刀具。为减少辅助时间将三把刀共装在一个刀杆上(见图1),轴箱在车床上一次安装夹紧,即能完成全部加工,每个轴箱可节约辅助时间15分钟。刀片4的材料为Bk_6,用作加工轴箱铜瓦内圆用。
First, the processing of three-edged moving trunnion Shank hanging copper hardware linked to the hardware after pressing machine, usually in the vertical lathe, according to the requirements of each processing a shaft box to be replaced three times the parking tool. In order to reduce the auxiliary time, the three knives are co-installed on an arbor (see Fig. 1). The axle box is installed and clamped in the lathe once to complete the machining. Each axle box can save the auxiliary time of 15 minutes. The material of the blade 4 is Bk_6, which is used for processing the inner circle of the copper box of the axle box.