小李:轴承拆卸下当易损坏轴承和轴,如何正确的拆卸轴承?请介绍一下拆卸轴承的方法。 老张:正确的拆卸方法有以下几种。 一、敲击法。此法适用于轴承内圈直径尺寸较大、与轴配合间隙较松,且有较大的动作空间,比较利于敲打的情况。敲击时,敲打方向应朝下,这样比较容易操作。同时要注意避免手锤打偏损伤其它零件。同时还应注意,手锤不能直 Xiao Li: When the bearing is removed easily damaged bearings and shaft, how to properly remove the bearing? Please tell us about the method of dismantling the bearing. Zhang: The correct removal methods are the following. First, percussion method. This method is suitable for the bearing inner ring larger diameter, with the shaft with the loose clearance, and a larger space for action, more conducive to the beat of the situation. When struck, the beating direction should be downward, which is easier to operate. At the same time pay attention to avoid hand hammer hit other parts damage. It should also be noted that the hammer can not be straight