【摘 要】
：
In order to prepare hydrophobic waterborne polyurethane coatings with better performances, the silicon-containing waterborne polyurethane (SiWPU) with functional chain extender hydroxyethyl acrylate (HEA) was prepared first, and then a series of silicon&f
【机 构】
：
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
In order to prepare hydrophobic waterborne polyurethane coatings with better performances, the silicon-containing waterborne polyurethane (SiWPU) with functional chain extender hydroxyethyl acrylate (HEA) was prepared first, and then a series of silicon&fluorine-containing polyurethane/acrylate (FSiPUA) emulsions were obtained with flourine containing acrylic monomer by seed emulsion polymerization, introducing micro-nano SiO2 into FSiPUA emulsion to make the final hybrid emulsion. The properties of SiWPU, FSiPUA and SiO2/FSiPUA were investigated by fourier transform infrared spectra (FTIR), transmission electron microscope (TEM), Scanning Electron Microscope (SEM) and some other analytical methods. The results revealed that FSiPUA emulsion particles possessed composite core-shell structure and FSiPUA films with suitable ratio performed better than SiWPU films in hardness, water resistance and solvent resistance. The SiO2/FSiPUA films with micro-nano dual roughness structure showed a water contact angle of 136° with good resistance to acid and alkali.
其他文献
This work mainly involved the preparation of a nano-scale form-stable phase change material (PCM) consisting of capric and myristic acid (CA-MA) binary eutectic acting as thermal absorbing material and nano silicon dioxide (nano-SiO2) serving as the suppo
Micro compression and micro extrusion experiments of ultrafine grained titanium cylindrical specimens in diameters of 4,2,and 1 mm prepared by equal channel angular pressing (ECAP) were conducted on the micro plastic forming test machine.The effects of sp
Diblock copolymers polystyrene-block-polyvinyltriethoxysilane (PS-b-PVTES) were synthesized via atom transfer radical polymerization (ATRP), which self-assembled into spherical micelles in solvent of THF-methanol mixtures. The self-assembled micelles were
Indium doped ZnO films were grown on quartz glass substrates by radio frequency magnetron sputtering from powder targets. Indium content in the targets varied from 1at% to 9at%. In doping on the structure, optical and electrical properties of ZnO thin fil
The dispersion ability of polycarboxylate superplasticizer (PCE) in fresh concrete was much impeded by clay impurities. To improve the dispersion of PCE in the clay-contained concrete, a novel PCE with carboxyl as a specific branched chain terminal group
Hydraulic characteristic is a good indication of binder hydration,which determines the strength development of cemented paste backfill (CPB).Therefore,the hydraulic characteristic should be communicated with the mechanical property to provide an advanced
We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means.First,the thermal simulation experiments for pure titanium TA1 were carried out to investigate the
A new kind of corrosion resistant steel for cargo oil tanks (COT) was developed. The influences of final rolling temperature, cooling rate, and final cooling temperature on microstructure were investigated. The proper rolling process parameters were obtai
Al2O3/SiO2 multilayer high-reflective (HR) mirrors at 355 nm were prepared by electron beam evaporation, and post-irradiated with Ar/O mixture plasma. The surface defect density, reflective spectra, and laser-induced damage characteristics were measured u