【摘 要】
：
In natural environment,tamish was observed on the surface of historic and contemporary gold coins in several countries.Few years after the emergence of panda go
【机 构】
：
State Key Laboratory of Fine Chemicals,Electromechanics & Materials Engineering
论文部分内容阅读
In natural environment,tamish was observed on the surface of historic and contemporary gold coins in several countries.Few years after the emergence of panda gold coins,several red spots were appeared on the surface.To identify the stains and to examine the spots,optical microscope (OM),scanning electron microscope (SEM),electron microprobe analysis (EMPA),X-ray photoelectron spectroscopy (XPS),and X-ray diffraction (XRD) were used.It was found by microscopic observation that the stain has a dark blue central area surrounded by a large area with a nuance of colors from brown to red.Red spots usually contain holes in the center,which are distributed along the forging stress zones formed in the struck process.From the surface analyses using EMPA,sulfur and silver are detected besides gold, and the contents of Ag and S at the tarnish part are higher than those at the other part. Furthermore,distributions of Ag and S are correlated with the morphology of stains. XPS shows that components of stains are Ag2S and Ag2SO4 and the former is much predominant.These results are confirmed using XRD analysis.Accelerated tarnish test of gold in an atmosphere containing sulfur compound proves that the similar phenomenon appears when a small amount of silver is present on the surface of gold.It can be concluded that the occurrence of tarnish stains is caused by the presence of Ag and S.
其他文献
In order to investigate the regularity of metal magnetic signals of ferromagnetic materials under the effect of applied load, the static tensile test of Q235 st
A new method to evaluate the fitness of the Bayesian networks according to the observed data is provided. The main advantage of this criterion is that it is sui
A microseismic monitoring system was used in the Donggua Shan underground copper mine,and its application was introduced.The spacial distribution of the seismic
Combining the GIS (geographic information systems) grid-based data with four proposed column-based 3D slope stability analysis models,a comprehensive solution o
An efficient design-for-testability (DFT) technique is proposed to achieve low overhead for scan-based delay fault testing. Existing techniques for delay test s
The deformation mechanism of the spray formed 70Si30Al alloy was studied by hot compression on a Gleeble-1500 test machine.It is shown that hot deformation of t
A PANI/TiO2 composite film deposited on the glass surface was successfully prepared using sol-gel dip-coating technique and chemical oxidation method.The film w
The effects of pouring temperature and short electromagnetic stirring with low strength on the microstructures of AlSi7Mg alloy were investigated.The results sh
In view of certain defects of common rough communication, using the S-rough sets, this article presents a S-rough communication model. The S-rough communication
The depth and nature of the subsurface damage in a silicon wafer will limit the performance of IC components.Damage microstructures of the silicon wafers ground