Microstructure Evolution of Extruded Mg-6Gd Alloy Under 175 ℃ and 150 MPa

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:jakieli
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The tensile creep behavior of extruded Mg-6Gd alloy,having the tensile yield strength of ~ 110 MPa at 175 ℃,has been investigated under 175 ℃ and 150 MPa.In this study,the extruded Mg-6Gd sample exhibits the total tensile strain of ~ 10.5% after the creep time of 1100 h,and the fast plastic strain of ~ 4.6% at the beginning of the creep test.The microstructure result suggests that the dislocation deformation is the main deformation mode during creep,and the grains with orientation close to ‖ ED disappear after creep.The creep process containing a low creep strain has no effective promotion for the precipitation compared with the aging process without strain.The origination of creep crack is related to the formation of precipitate-free zone during creep.The work offers an important implication to research the microstructure evolution under an applied stress in a weak aging response Mg alloy.
其他文献
The microstructure and mechanical properties of NiCrMoV-and NiCrSi-alloyed medium-carbon steels were investigated after multiple tempering.After austenitising,the steels were hardened by oil quenching and subsequently double or triple tempered at temperat
To understand the atomistic mechanisms of tension failure of Ni-based superalloy,in this study,the classical molecular dynamics (MD) simulations were used to study the uniaxial tension processes of both the Ni/Ni3Al interface systems and the pure Ni and N
In the present work,the electrochemical behavior and properties of the passive film of a new Sn-alloyed 316LX austenitic stainless steel were investigated.With the increase in Sn content in 316LX austenitic stainless steel from 0 to 0.21%,the critical pit
Mg-2Al-1.2Ca-0.2Mn (at%)-based alloys with Ce-rich mischmetal (MM) substitution of 0-0.6 at% for Ca were hot extruded at 400 ℃.The effect of MM substitution on the microstructure and mechanical properties of the extruded alloys was investigated.The as-cas
The high-current pulsed electron beam (HCPEB) treatment with current density 6 J/cm2 was applied on AZ91 Mg alloy to improve its corrosion resistance.Results showed that the net-like Mg17Al12 disappeared on the surface of AZ91 Mg alloy after irradiation b
The effect of lead on the initial corrosion behavior of 316LN stainless steel has been investigated by U-bend immersion experiments in 4 wt% NaOH solutions at 300 ℃.Follow-up studies after soaking were carried out by scanning electron microscope,energy di
In this work,the effect of prior cold deformation on the stability of retained austenite in GCr15 bearing steel was investigated after quenching and tempering treatment.The thermal stability was evaluated by calculating thermal activation energy for decom
Mg AZ31/Al 7050 laminate was fabricated by co-extrusion directly from the as-cast Mg AZ31 and Al 7050 billets.The influence of annealing temperature and annealing time on microstructure and mechanical behavior of the extruded Mg/Al laminate was systematic
The AZ31 Mg alloys were processed by 6% pre-compression and frustum shearing extrusion at various temperatures,and the microstructure,texture and mechanical properties of the resulting alloys are systematically investigated.The results show that the grain
The rupture behavior of the modified 10Cr-lMo steel multi-layer welded joint is determined by the fine-grain zones of the weld metal adjacent to the fusion line during the long-term creep test at 620 ℃.The microstructures of multi-layer weld metal before