【摘 要】
：
The microstructures and properties of hot-rolled low-carbon ferritic steel have been investigated by optical microscopy, field-emission scanning electron micros
【机 构】
：
Engineering Research Institute
论文部分内容阅读
The microstructures and properties of hot-rolled low-carbon ferritic steel have been investigated by optical microscopy, field-emission scanning electron microscopy, transmission electron microscopy, and tensile tests after isothermal transformation from 600°C to 700°C for 60 min. It is found that the strength of the steel decreases with the increment of isothermal temperature, whereas the hole expan-sion ratio and the fraction of high-angle grain boundaries increase. A large amount of nanometer-sized carbides were homogeneously distrib-uted throughout the material, and fine (Ti, Mo)C precipitates have a significant precipitation strengthening effect on the ferrite phase because of their high density. The nanometer-sized carbides have a lattice parameter of 0.411-0.431 nm. After isothermal transformation at 650°C for 60 min, the ferrite phase can be strengthened above 300 MPa by precipitation strengthening according to the Ashby-Orowan mechanism.
其他文献
我国中小企业的营销管理水平一直以来都处于比较落后的阶段,无论是营销观念还是相关的手段,都难以达到更高的层次.中小企业营销管理存在营销理念不尽科学、营销手段缺乏创新
A facile and efficient synthesis route for the preparation of Tm-Fe-Co-Ni-Mn multicomponent alloy films was reported. Here the films with nanostructures were su
In this study, the dependences of yttria content, porosity and grain siz.e on the thermal properties of Y2O3 stabilized ZrO2 (YSZ) ceramics were investigated. Y
我国中小企业发展迅猛,在国民经济中发挥着越来越重要的作用.库存控制是企业生产经营管理过程中一个十分重要的环节.文章围绕中小企业库存控制中存在的一些难点与问题展开探
Rare earth element (REE) concentrations of two different types of groundwaters (high SO42- water-SW and high alkaline waterCW) from coal bearing aquifer (-400～-2
Mine dust is classified as one of five natural coal mining disasters because it can harm the health of miners and poses a serious threat to the safety of the co
In this study, we characterized strain F9 and evaluated the interaction between strain F9 and hematite by scanning electron microscopy(SEM), Fourier transform i
We developed a mathematical optimization model coupling chemical compositions and high-temperature characteristics of sintering materials, targeting the best qu
In the 20CrMnTi steel production process, the nitrogen content increased by 19 × 10-6 and 29 × 10-6, respectively, during ladle furnace(LF) refining and durin
A mathematical model has been presented to study the combustion of a single copper concentrate particle with high moisture con-tent. By using the presented mode