粘结剂和润滑剂对铁粉流动性和松装密度的影响

来源 :粉末冶金技术 | 被引量 : 0次 | 上传用户:songyonghuan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
加入聚乙二醇、硬脂酸锂、二硫化钼及同时加入聚乙二醇和硬脂酸锂、聚乙二醇和二硫化钼 ,对铁粉流动性和松装密度的影响作了研究。结果表明 ,聚乙二醇加入 0 .1 %时可以较大提高铁粉的流动性和松装密度 ;硬脂酸锂加入 0 .2 %~ 0 .5 %时能较好改善铁粉的流动性和松装密度 ;二硫化钼加入 0 .2 %时对铁粉的流动性有较好的改善 ,但二硫化钼对改善铁粉的松装密度效果很小 ;同时加入聚乙二醇和硬脂酸锂对铁粉流动性和松装密度的改善有很好的效果。二硫化钼和聚乙二醇同时加入时可以提高铁粉的流动性 ,但对松装密度影响不明显。 The effects of adding polyethylene glycol, lithium stearate, molybdenum disulfide, and simultaneously adding polyethylene glycol and lithium stearate, polyethylene glycol and molybdenum disulfide on the fluidity and bulk density of iron powder were studied. The results show that the addition of 0.1% polyethylene glycol can greatly improve the mobility and bulk density of iron powder; lithium stearate added 0.2% ~ 0.5% can better improve the flow of iron powder And bulk density. When adding molybdenum disulfide to 0.2%, the fluidity of iron powder is better, but molybdenum disulfide has little effect on the bulk density of iron powder. At the same time, adding polyethylene glycol and hard Lithium stearate has good effect on the improvement of iron fluidity and bulk density. When molybdenum disulfide and polyethylene glycol are added simultaneously, the fluidity of the iron powder can be increased, but the influence on the bulk density is not obvious.
其他文献
人际功能是语言的重要社会功能。本论文以英文版的中华人民共和国合同法为语料,从系统功能语法的角度对我国合同法中的情态进行分析并揭示了情态所体现的人际功能。通过对合
计算研究了Ni含量对Ti-C -Ni三元体系燃烧合成绝热温度的影响 ,试验研究发现随着Ni含量、稀释剂含量和Ti颗粒尺寸的增加 ,Ti-C -Ni体系燃烧温度和燃烧速度呈下降趋势。Ni在Ti