论文部分内容阅读
·使用时始终要用新鲜的焊锡保持烙铁头表面光亮。当烙铁头接触到焊接点时,这种焊锡涂层就会展平,形成较大的接触面以利更有效的热量流动。·在烙铁头上保留剩余焊锡。特别是在烙铁较长时间不使用的时候,例如当烙铁搁在支架上时。·至少每天清洗一次烙铁头。具有化学活性的焊剂会使烙铁头表面变得粗糙,烙铁头上不要积留杂质和残留焊剂。·不要为了消除氧化物而锉掉烙铁头上的涂层,否则会暴露铜基材。·经常拆下烙铁头,以清洗烙铁头插入烙铁加热元件中的部分,然后再重新装上烙铁头。清洗能够防止这部分电阻增大,并能防止烙铁头粘附在烙铁筒里。同时,在使用的时候,要使烙铁头
Always use fresh solder to keep the tip shiny. When the soldering tip touches the solder joint, the solder coating flattens out and forms a larger contact area for more efficient heat flow. Keep the remaining solder on the tip. Especially when the soldering iron is not in use for a longer period of time, such as when the iron rests on a stand. · Clean the tip at least daily. Chemically active flux will make the surface of the tip rough, do not keep the tip of the iron impurities and residual flux. Do not file the tip of the soldering iron in order to eliminate oxides, otherwise it will expose the copper substrate. • Always remove the soldering iron tip to clean the soldering iron tip into the part of the soldering iron heating element, and then replace the soldering tip. Cleaning can prevent this part of the resistance increases, and can prevent the iron head adhesion in the iron tube. In the meantime, when using, make tip