Roles of Lewis and Brφnsted acid sites in NO reduction with ammonia on CeO2-ZrO2-NiO-SO42- catalyst

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:f023144553b
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Nickel and sulfate co-modified CeO2-ZrO2 catalysts were prepared by sol-gel method.The catalysts were characterized by XRD,FTIR,XPS,NH3 chemisorption and NH3-SCR activity tests.The results showed that the enhanced acidity of CeO2-ZrO2 catalysts by nickel and sulfate co-modification was responsible for the broadened temperature window and improved the selectivity to N2 in NH3-SCR deNOx.The introduction of nickel to CeO2-ZrO2 solid solutions resulted in more Ce3+ on surface of catalyst,leading to an increased Lewis acidity of catalyst.Higher Lewis acidity of catalyst facilitated ammonia activation at low temperature (<300 ℃) and thereby improved the NH3-SCR activity.The enhanced high-temperature (>300 ℃) activity and selectivity of catalysts arose from the introduction of Brφnsted acid sites (less oxidative than Lewis acid sites) by sulfate modification.
其他文献
以云南优质烤烟为实验材料,在国产光栅漫反射型近红外仪器上,比较研究了不同年份样品建模、不同化学值分布建模对近红外检测结果的影响.结果表明:总糖、尼古丁组分模型偏差受
Methods of the comprehensive evaluation have been studied for many years.However,the change speed of evaluated objects was rarely considered by the existing eva
Vacuum distillation is a technique suitable for low boiling and melting point materials,to remove the heavy and low vapor pressure impurities at low level.As in
Large amount of high concentration acidic wastewater would be produced in the conversion process of chloride rare earth into oxide rare earth.It was a mixed sol
The accumulation of rare earth elements(REEs)in soil has occurred due to the pollution caused by the exploitation of rare earth resources and the wide rare eart
Two acid mine drainage (AMD) samples TS and WK, which were from the Dachang metals-rich mine in Guangxi province, China, were studied using PCR-based cloning ap
Cellular lightweight concrete (CLC) with the controlled density of approximately 800kg/m3 was made from a preformed foam, Type-I Portland cement (OPC), fly ash