论文部分内容阅读
OSB Lubotrol 离心式润滑油净化装置具有自动去除油渣,使管理和清洁工作量减到最少的优点。其操作方法:少量油经回路(3)(见图)流入,通过分离器盘(7)转向,并由传感泵(4)输送,通过压力开关(2)和节流阀(16)反馈到供油管路(15)。在分离过程中,固体和水、油分离并聚集在油渣腔(9)中。当水达到控制孔(8)时(表示油渣液位已达到一个可见的位置),中断来自旁通(3)中的流量。压力开始下降,压力开关(2)给定时装置(5)发出一个脉冲信号,自动去除油渣程序开始。
The OSB Lubotrol Centrifugal Oil Purifier has the advantage of automatically removing oil sludge and minimizing management and cleaning efforts. The method of operation: a small amount of oil flows through the circuit (3) (see the figure), is diverted by the separator disk (7) and is conveyed by the sensing pump (4), fed back by the pressure switch (2) and the throttle valve To the fuel line (15). During the separation, the solids and water, oil separate and accumulate in the oil chamber (9). When the water reaches the control orifice (8), indicating that the oil level has reached a visible position, the flow from the bypass (3) is interrupted. The pressure starts to drop, and the pressure switch (2) gives a pulse signal to the given device (5) to start the process of automatically removing the oil residue.