论文部分内容阅读
目前常用试件两个方向同时受荷的方法测定砖石结构的抗剪强度.这种方法需要用专门的试验设备.这些设备在标准实验室中都不常见。本文所介绍的方法可以在相当简单的设备上测出抗剪强度参数。如果根据该建议建立一个试验方法并被采用的话.就可以使设计中的抗剪强度设计值有一定的提高。这将使设计更经济,因为许多种砂浆与砖或砌块组成的砌体的抗剪
At present, the shear strength of the masonry structure is determined by the commonly used method of loading both directions at the same time. This method requires the use of special test equipment. These devices are not common in standard laboratories. The method described in this article can measure shear strength parameters on a fairly simple device. If a test method is established and adopted according to this proposal, the design value of the shear strength in the design can be increased. This will make the design more economical because of the shear resistance of many kinds of mortar and masonry made of bricks or masonry blocks.