论文部分内容阅读
矿山井下给、排水管路一般采用铁质管路,随着使用时间延长,这些管路不可避免地出现锈蚀直至发生泄漏,严重影响正常生产,且造成大量能源浪费。本人根据工作经验,介绍1种在不影响生产情况下快捷简易的封堵方法。具体如下:先准备1个比泄漏孔略大的螺母,然后用电焊机严实地焊接到泄漏孔上,再把螺栓拧到螺母中,最后把螺栓与螺母焊接严实即可。
Mine underground to the drainage pipe commonly used iron pipe, with the use of time, these pipes inevitably rust until leakage occurs, seriously affecting the normal production, and resulted in a lot of energy waste. According to my work experience, I introduced a quick and easy plugging method that does not affect the production situation. As follows: Prepare a slightly larger than the leakage hole nut, and then use the welding machine to seal the leakage hole, and then bolt to the nut, and finally the bolt and nut can be strictly welded.