【摘 要】
：
The rare earth doped TiO2 was prepared and characterized with Nd,Ho and Y as the doping agents,which have obvious absorption in visible light area.The particle size of the glomeration was about 200-400 nm.TiO2 sensor performed a significant change in resi
【机 构】
：
School of Urban Construction,Wuhan University of Science and Technology,Wuhan 430070,PR China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The rare earth doped TiO2 was prepared and characterized with Nd,Ho and Y as the doping agents,which have obvious absorption in visible light area.The particle size of the glomeration was about 200-400 nm.TiO2 sensor performed a significant change in resistance when exposed to methanol vapor.By comparison,the Nd,Ho and Yb doped TiO2 sensors exhibited a response of 2.22,4.05 and 3.78,and lowered response and recovery times of 91,56 and 67 s,respectively.The Ho doped TiO2 showed the best methanolsensing properties,which exhibited high selectivity and response to methanol compared with the other tested vapors.In concentration of 0-10 ppm,the sensor exhibited excellent stability for detecting methanol at various concentrations.
其他文献
The effects of circulating fluid bed (CFB) ash on the adsorption performance of polycarboxylate superplas-ticiser and the mechanism of this influence on the dispersive property of the polycarboxylate superplasticiser were investigated by determing the cem
The semisolid A356 alloy strip was prepared by a novel continuous micro fused-casting process. The microstructure evolution and mechanical property of A356 aluminum alloy strip with different nozzle temperatures were investigated. The nozzle temperature h
The water absorption and desorption processes of different types of lightweight aggregates were studied. Subsequently, the influences of pre-wetting lightweight aggregates on compressive strength, microhardness, phase composition, hydration parameters and
The effects of Cr3+,Cu2+,and Pb2+ on compressive strength,reaction products,and pore structures of fly ash based geopolymer were studied.In addition,the immobilization and bonding interaction between heavy metal and fly ash based geopolymers were investig
Plasma-enhanced CVD (PECVD) epitaxy at 200 oC was used to deposit heavy doped n-type silicon films. Post-annealing by rapid thermal processing was applied to improve the properties of the epitaxial layer. By analyzing the Raman spectra and the imaginary p
In order to investigate how to enhance the teeth fracture resistance after the post and core treatment, an in vitro study was conducted to measure the fracture resistance of endodontically treated teeth restored with cast post and core with two kinds of s
The effect of spherical particle size on the surface morphology, electrochemical property and processability of lithium iron phosphate was systematically studied. Spherical lithium iron phosphate with different particle size distributions controlled with
A modified co-precipitation method for the production of Cu/ZnO/Al2O3 complex was studied. The modification was that part of Al was introduced by adding Al3+ into Cu2+/Zn2+ solution, and the rest of Al was added after co-precipitation step in the form of
A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and
Zn2SnO4/few-layer boron nitride nanosheets (FBNNS) hybrids were synthesized via a one-step hydrothermal method. The structures, morphology, optical properties, electron transformation and separation of the as-prepared products were characterized by X-ray