【摘 要】
：
Based upon an analytical model for predicting the crack growth in fiber reinforced metal laminates (FRMLs), some factors affecting the fatigue crack growth rate
【机 构】
：
Beijing Institute of Aeronautical Materials
论文部分内容阅读
Based upon an analytical model for predicting the crack growth in fiber reinforced metal laminates (FRMLs), some factors affecting the fatigue crack growth rates of FRMLs were analyzed, including the lay-up of FRMLs, the modulus of the fibers, the residual stresses in FRMLs, the bonding strength and the shear modulus of the adhesive, etc.It was shown from the present analysis that the interface number of the laminates, the modulus of the fibers and the residual stresses in FRMLs have very great effects on the fatigue lives of FRMLs, but the effects of the bonding strength and the shear modulus of the adhesive are relatively small.
其他文献
利用刚(粘)塑性有限元法对某TC4钛合金锻件的锻造过程进行了数值模拟.分析了变形过程中锻件的变形情况以及应力场和损伤值的分布,进而对变形过程中出现的裂纹、折叠等锻造缺
针对结构材料LF3铝合金管材,开展了电磁成形翻边极限和四通管件成形试验研究.结果表明,电磁成形工艺可以提高LF3铝合金成形极限,在采用合理的工艺参数和预制孔结构尺寸的条件
通过改进整盘钢骨架两面烧结粉末合金刹车盘的结构,直接成形卸荷槽,取消冲卸荷槽工序,完全解决该刹车盘长期存在的在后续加工及使用过程中的掉块问题。
By improving the st
将化学动力学机理耦合燃烧模型进行湍流燃烧数值模拟有重要意义。在分析目前现有燃烧模型的基础上,采用CH4/空气化学反应动力学机理和EDC燃烧模型对燃烧器中的二维湍流扩散燃
通过对TC4钛合金旋压成形工艺技术的试验研究,分析了影响旋压成形和旋压件精度的因素,同时分析了旋压件的组织性能.试验结果表明,采用合理的旋压工艺及工艺参数,可以旋制较高
Thrust vectoring is one of the advanced technologies in the design of the 4-th generation fighter to provide high maneuverability and agility.The purpose of thi
A multistage reconfiguring strategy is proposed to deal with the fault tolerance problem of RFCS(the reconfigurable flight control system) in the fault diagnosi
This paper deeply researches the inner relation and contradictory conflict of the unity which consists of joint geometrical positions, orientations and joint ve
Using a servo hydraulic material test machine system (MTS88010) , tensile experiments of glass-cloth/epoxy laminates at moderate strain rates (1/s) were carried