銅矿沸騰层部分氧化焙烧在技术上和操作上均存在不少困难。国外也缺乏这方面的成功經驗,最近国內在苏联专家的指导下,經多次的探索和研究,終于試驗成功。下面介紹一下其試驗过程及其結果: 下面簡单介紹一下銅矿半氧化焙烧的試驗过程及結果。試驗是在第三銅矿冶炼厂的工业性沸騰层焙烧試驗爐进行的,爐子为长方形,爐瞠面积为2.7平方米(2.7M×1.0M)。沸騰层高80厘米,沸腾层上部高度5.2米,沸騰层上部截面积为3.6米~2。沸騰层周围有同样大小的冷却水套五块,总冷却面积为1.77米~2,为了調节沸騰层溫度,还插入噴水管一根。关于爐子的結构,风帽的型式、收尘系統的装置、以及开停爐操作、故障处理等等,基本上与鋅矿 Partial oxidation roasting of boiling layer of copper ore has many difficulties both technically and operationally. Abroad also lacks successful experience in this field. Recently, under the guidance of Soviet experts, China has finally succeeded in experiments after many times of exploration and research. The following describes the test process and its results: Here is a brief introduction to the semi-oxide roasting process and results. The tests were carried out in an industrial boiling furnace for the third copper mine smelter with a rectangular furnace with an area of ​​2.7 square meters (2.7M x 1.0M). The height of the boiling layer is 80cm, the height of the top of the boiling layer is 5.2m, and the upper section of the boiling layer is 3.6m ~ 2. Boiling around the same size of the cooling water jacket five, the total cooling area of ​​1.77 m ~ 2, in order to adjust the boiling temperature, but also to insert a water pipe. Regarding the structure of the furnace, the type of hood, the installation of the dust collection system, the operation of the shutdown ovens, the troubleshooting, etc.,