Measurement the viscoelastic properties is important for studying the developmental and pathological behavior of soft bi......

...

...

Needle roller bearing is one of the most widely used parts in transmission,however it often fails due to wear.In order t......

Due to the intrinsic nature of a heterogeneous and anisotropic microstructure of cement based materials and the small in......

Surface defects caused by damage or corrosion are major factor in petrochemical pressure vessels and line pipes failure.......

A modeling method to extract the mechanical properties of ultra-thin films (10–100 nm thick) from experimental data gen......

We present a multimodal ferrule-top sensor designed to perform the integrated epidetection of Optical Coherence Tomograp......

The mechanical behavior and indentation creep of Al-20 wt%<span style=\"white-space:normal;font-family:宋体;\"> </sp......

Several molybdenum silicides based alloys were produced by arc cast method with different vanadium additions. The micros......

The introduction of residual stress during the processing of materials has an important impact on the properties of the ......

　　Most natural biomaterials such as brain,cartilage and bones are composite materials that consist of the viscoelastic......

作为脆隆材料的 Na-Ca-Si 玻璃,其纤维的应力应变曲线明显地偏离完全弹性,用Vickeis 金刚石尖压痕研究 Na-Ca-Si 玻璃时,也发现许......

The microstructure and nano-tribological properties of 316 austenitic stainless steel have been investigated by using th......

为了解决用AFM自身压痕软件进行纳米硬度测量时无法直接获得载荷-压深曲线和由于受到扫描陶管扫描范围的限制而进行多点压痕实验范......

A gel, an aggregate of polymers with solvents, has dual attributes of solid and liquid as solvent migrates in and out of......

Hot water treatment was performed to modify the surface of porous TiO2 layer prepared by anodic spark oxidation techniqu......

Nanocrystalline ZrB 2 film and nanocomposite Zr-B-O-N films were prepared by non-reactive as well as reactive magnetron ......

The characteristics of C-S-H gel in hardened Portland cement pastes and complex binder pastes with ground granulated bla......

Hydrogels,three-dimensional hydrophilic polymer networks,are appealing candidate materials for studying the cellular mic......

With the rapid development of micro/nano manufacturing technology and nanomaterials,the accurate measurement of the mech......

In order to avoid the defects of mesh distortion when dealing with large deformation problems through using the finite e......

Diatomite was used as raw material to prepare sodium silicate with a modulus of 3.1 by alkalidissolution method and the ......

In the present study,WB_2(N) films are fabricated on silicon and YG8 substrates at different N_2 pressures by reactive m......

Strengthening in metals is traditionally achieved through the controlled creation of various grain boundaries(GBs),such ......

Multiscale simulations of the tilted flat-ended nanoindentation with different tilted angles(from 5?～30?) on the(-1 1 0) ......

1 Introduction Mechanical properties of coal are most important parameters in controlling fluid storage and flow before ......

The naniondentation fracture of multilayer hard coatings, such as TiN, TiN/Ti(C, N)/TiC, TiN/Ti (C,N)/TiC/Ti (C, N)/TiC ......

Closed Field Unbalanced Magnetron Sputter Ion Plating (CFUBMSIP) systems have been used increasingly for PVD coating in ......

By using double glow plasma surface metallurgy technique, the molybdenum (Mo) surface-modified layer on titanium (Ti) wa......

Tungsten is one potential candidate of the plasma-facing materials because of its excellent properties such as high melt......

Reduced activation ferritic/martensitic(RAFM)steel is of low activation properties and is selected as a candidate of str......

Reduced activation ferritic-martensitic (RAFM) steel is of low activation properties and was selected as a candidate of ......

A TiNi-alloy is solution-treated in a vacuum furnace of 6.7×10-3 Pa at 1 223 K for 3.6 ks, and then aged at 773 K for 1......

Studies of nanoindentation were performed on nc-Si:H films to evaluate the effects of the fabrication processes on their......

Six kinds of micro bridge-beam specimens with different sizes are fabricated using photolithography technology for bendi......

Nanoindentation technique is a technique that determines the mechanical properties of a material in sub-micron scale. Th......

Dip-pen nanolithography is a new scanning probe lithography (SPL) technique based on atomic force microscopy (AFM), and ......

The microstructure of Ti/TiN multilayer film was studied.It was shown by trans-mission electron microscopy of cross-sec......

Diamond-like carbon (DLC) films was deposited successfully on stainless steel substrateswith Si/SiC intermediate layers......

In order to understand the fundamentals of the chemical mechanical polishing(CMP) material removal mechanism,the indenta......

Results on fracture mechanics and crack propagation have been obtained, making use of Vickers microhardness studies on t......

Indentations etched on the output surface of a metallic mask are proposed to produce fine lithographic patterns with a r......

使用有限元方法(FEM)分析了应变硬化的韧性薄膜/基底体系的锥形压痕过程.通过改变压入深度与薄膜厚度比,从0.01变化到0.85,得到了......

Based on the multibeam morpho-tectonic analysis of the Manila Trench accretionary wedge and its indentation tectonics ......

In ductile mode cutting of brittle materials using di amond tools, such as ductile cutting of silicon and quartz for wa......

In order to characterize the plastic state of a deformed material, an indentation method to determine the plastic equati......

In response to current development of materials in nano-science.characterisation of thin coating adhesion ona nano-scal......

To understand the deformation and removal mechanism of material on nano-scale at ultralow loads,a systemic study on AFM ......

Nanoindentation technique was adopted to investigate the chemomechanical properties change of hardened cement paste befo......